- Overview Brochure
- Ballistic Protection
- Non-Ballistic Protection
- Tactical Solutions
- About Us
- Contact Us
In cooperation with Peak Beam Systems, Inc., MDFPs can be outfitted with long-range Searchlights for use in identifying oncoming vehicles and personnel. Maxa Beam Searchlight is a lightweight, high-intensity illumination system with an output of 12,000,000 candlepower. The Maxa Beam has three light intensity settings and a powerful strobe that makes it a disorienting non-lethal weapon. The Searchlight also features a motorized beam width adjustment that allows the user to vary the beam from a 1° spot to a 40° flood with the press of a button. All Maxa Beam Searchlights have a remote port and can be controlled using wired switches or a wired remote handle and are available with an IR filter
1,4000 w/850nm IR Filter
1-40 degrees Candlepower
This attachment is not ballistically-rated.
|Level I||.22 long rifle high velocity lead||40||2.6||320 +/- 12||1050 +/- 40||5|
|Level I||.38 special round nose lead||158||10.2||259 +/- 12||850 +/- 50||5|
|Level IIA||.357 mag. jacketed soft poin||158||10.2||381 +/- 15||1250 +/- 50||5|
|Level IIA||9mm full metal jacket||124||8.0||322 +/- 12||1090 +/- 40||5|
|Level II||.357 mag. jacketed soft poin||158||10.2||425 +/- 15||1395 +/- 40||5|
|Level II||9mm full metal jacket||124||8.0||358 +/- 12||1175 +/- 40||5|
|Level IIIA||.44 mag. lead semi-wadcutter gas checked||240||15.55||426 +/- 15||1400 +/- 50||5|
|Level IIIA||9mm full metal jacket||124||8.0||426 +/- 15||1400 +/- 50||5|
|Level III||7.62mm (.308 Winchester) full metal jacket||150||9.7||838 +/- 15||2750 +/- 50||5|
|Level IV||.30-06 armor piercing||166||10.8||868 +/- 15||2850 +/- 50||1|
The following items are some basic questions to ask when preparing your Defenshield order.
What is the nature of the threat – small arms, rifle rounds, armor piercing, IED blast?
Will the unit be used indoors or outdoors?
Will the unit be used for riot control or hostage negotiations?
Do you require conspicuous deterrence or camouflage?
Will the unit need to match the aesthetics of it’s surroundings – wood or stone finishes?
Will you need traffic control signage, unit logos or law enforcement badges displayed on the unit?
What is the size of the space where the unit will be used?
Will the unit need to fit through doorways, into elevators?
What are you protecting – people, objects?
(For maximum blast mitigation, units must be secured or lagged.)
What surface are you using the unit on – gravel, dirt road, finished concrete, wood floor?
Will the unit be frequently relocated?
Will you be transporting the unit over long distances or within a few feet?